This product has excellent mechanical capability, favorable electric insulation at temperature as low as -269℃ and as high as +260℃. Application: H class film can be used in compound insulation material, adhesive tape, electric wire and motor industry, ect.
Notice：The above table reflects only typical or average data , just for providing practical advice in practical application as far as possible, the data does not assume any responsibility for the use of the product or legal liability.
Package and other terms:
Package: Inside: Polythene film; Outside: Carton or wooden case
Store: Sealed and in dry place, quality guaranteed for two years.
Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.
|Appearance||Transparent or semi-transparent golden film with smooth and flat surface and without any needle cavities, bubbles or electrically conductive impurities.|
|Tensile strength (MPa≥)||MD||150||120|
|Elongation at Rupture(%≥)||50||60|
|Surface Resistivity (Ω.cm≥)||1.0×1013|
|Volume Resistivity(Ω. ≥)||1.0×1015|
|Dielectric constant (106H)||3~4|